Field Service Maintenance Mechanic II - First Shift
This job is no longer active.
View similar jobs.
POST DATE 8/11/2016
END DATE 10/11/2016
JOB DESCRIPTIONTHE REQUIREMENTS
To meet the basic qualifications for the Field Service Maintenance Mechanic II role you will have:
* Legal authorization to work permanently in the U.S. for any employer without requiring visa transfer or visa sponsorship.
* A high school diploma or GED.
The ideal candidate for this role will have basic industrial electrical experience, PLC troubleshooting, skill with machine controls and a strong mechanical background. To be a good fit you also should have:
* 5+ years of related experience, or an equivalent combination of education and experience.
* Well-developed electrical and mechanical abilities and a strong understanding of how things work and operate together in a process flow environment.
* The demonstrated ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic and ability to read and understand electrical and mechanical drawings. Quick question for you - click here
* The skill to monitor, check and correct electrical and mechanical issues such as, but not limited to: phase imbalances, current draw, low voltage power supplies, pressure transmitters, relay logic programmable logic control operation, mechanical failures of pumps, valves, piping, actuators, motors, contactors, etc.
* A commitment to working safely with high pressure gases and electrical components. Quick question for you - click here
* Your own tools, a well-developed professional Technician style set 1 " and less equipped to work on a combination of mechanical and electrical equipment. Examples of tools but not limited to: Wrenches/sockets/Allen wrenches/pliers/pipe wrench/large adjustable wrenches, electrical test meter, electrical screw drivers, torque wrenches etc.
* Basic knowledge of Microsoft Office applications. Quick question for you - click here
* An acceptable or insurable driving record.
* Willingness to be on call. You will need to hit response times (specified by contract) 100% of the time. You may be required to work overtime, though overtime will be limited.
* A home neighborhood/environment safe and secure enough to park a fully stocked company truck.
* Modern automotive or diesel repair experience with expertise in mechanical and on board electrical diagnostic systems is a plus.
* The practiced skill of diagnosing and repairing mechanical problems on high pressure gas/air systems is a plus.
* PLC experience with demonstrated ability in component replacement and diagnosis is a plus.
* Interpersonal and customer service skills -- the talent to effectively interact with customers, acting as a strong representative for Clean Energy, building client relationships, and responding to requests in a timely and appropriate manner.
* Client communication abilities -- the skill and talent to take highly technical information, translate it then present it to customers in easily understandable terms.
* Language and communication skills -- the ability to read and comprehend simple instructions, short correspondence and memos, write simple correspondence, and effectively present information in one-on-one and small group situations to customers, clients, and other Clean Energy employees.
* Mathematical skills and reasoning abilities -- the skill to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; to compute rate, ratio, and percent and draw and interpret bar graphs.
* The ability to apply common sense understanding to carry out detailed written or oral instructions and deal with problems involving a few concrete variables in standardized situations.
This opening is for the first shift, typically 8am-5pm, M-F. In addition to these requirements, some flexibility and a willingness to be on call 24/7 every other week is required. On occasion you might be asked to cover another territory in order to provide sufficient coverage. On those occasions, overnight travel could be required.
As a Field Service Maintenance Mechanic II, you will inspect, maintain and repair the fueling equipment and ensure an esthetically pleasing appearance for your assigned CNG stations in Denver. You will provide equipment and control maintenance and create positive customer relations that promote Clean Energy. You will travel to your stations each day for general maintenance & repair, to make sure safety interlocks for shut-down systems are working properly, and/or to automatically rebuild compressors after 5000 hours of use.
You'll get to know your customer, checking in upon arrival, and building a line of open communication. You might meet with the phone company to repair or install a line, or take time to paint or clean the site. These are your stations to monitor and you will take responsibility for their overall care, with the lion's share of your duties being control and mechanical maintenance. You also will serve as backup for adjacent territories, as needed.
Specifically you will:
* Make periodic inspections of fueling locations and equipment to determine that proper and normal operating conditions are being met.
* Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
* Install, remove and modify fueling locations and equipment.
* Maintain all fueling related equipment and structures in accordance with manufactures and Clean Energy guidelines.
* Clean and maintain fueling locations by picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing fueling equipment, and painting and maintaining the canopy, lot, islands, and surrounding landscaping in and outside of enclosures.
* Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
* Inspect, maintain, adjust, repair or replace electrical equipment including electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters and controls for safe and proper operating condition.
* Inspect, maintain, adjust, repair or replace mechanical equipment such as compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
Note: this description is intended to give you a general overview of the position and is not an exhaustive listing of duties and responsibilities.
WHY CLEAN ENERGY
Strong training -- you bring strong learning acumen and a great attitude and we'll provide the tools you need to succeed. The first week you'll shadow another Technician who will show you the scope of the position and help you learn your assignment. Within the first few months, you'll also travel to Denver to attend a two-week group training session. And of course, you'll have teammates in other locations and your supervisor whom you can call to ask questions as you are becoming acclimated.
Career growth potential -- there are plenty of opportunities and growth options for our strong players. You might choose to pursue the traditional path to a Senior Field Service Maintenance Mechanic, move sideways into a Commissioning Tech role for opening new stations, or even pursue a degree focused on engineering or operations positions. With strong performance, talents and interest, you can chart the direction of your career. Some opportunities require relocation.
Green standard for sustainability -- you probably already knew that natural gas burns much more cleanly than gasoline and diesel, producing significantly lower greenhouse gas emissions.
Clean Energy Fuels is an equal opportunity employer. EOE/AA/M/F/Vets/Disabled